Gurgaon, Haryana, India   |   +91-9911919312   |   info@sabaaluminumindia.com
Home › Service Areas › Rajasthan › Bhiwadi › Curtain Wall

Curtain Wall in Bhiwadi

Discuss materials, fabrication, design coordination and installation for your Curtain Wall project in Bhiwadi.

GET A PROJECT QUOTATION →

Curtain Wall in Bhiwadi: Engineered Aluminium and Glass Exterior Systems

Situated within the NCR industrial belt along the Alwar Bypass Road and Dharuhera-Sohna corridor, Bhiwadi has grown into a major manufacturing, logistics, healthcare, and commercial center. Multi-story commercial plazas, factory administrative blocks, hospitals, and corporate offices across Bhiwadi, Khushkhera, Chopanki, and Tapukara increasingly replace heavy exterior brick walls with continuous glazed envelopes. Designing and installing a dependable Curtain Wall in Bhiwadi requires precise structural planning to handle northern Rajasthan's extreme summer heat, peak temperatures exceeding 44 degrees Celsius, heavy industrial airborne dust, and pre-monsoon wind gusts. Unlike standard punched windows seated inside masonry apertures, a curtain wall hangs outside the concrete floor slabs as a continuous, weather-sealed aluminium and glass grid. SABA Aluminium & Glasses provides complete curtain wall engineering coordination, heavy-gauge 6063-T6 aluminium profile fabrication, solar-control glass sourcing, and on-site erection across Bhiwadi and surrounding industrial estates.

How Curtain Wall Systems Operate on Multi-Story Buildings

A curtain wall is a non-load-bearing exterior building facade constructed from vertical aluminium mullions, horizontal transoms, and infill glass or spandrel panels. Because the system carries no dead weight from the roof or upper floor slabs, it transfers only its own weight and lateral wind pressures back to the main RCC columns and floor slabs through engineered steel anchor brackets.

Across developing commercial and industrial stretches in Bhiwadi—including Alwar Bypass Road, Mansa Chowk, RIICO Industrial Area, Khushkhera, Chopanki, and Tapukara—two primary curtain wall construction methods are deployed:

The stick-built curtain wall system is the most practical choice for low- to mid-rise commercial buildings, factory admin blocks, and hospitals. Vertical mullions and horizontal transoms are delivered to the site in cut lengths, erected piece-by-piece onto slab brackets, and glazed on location. For taller multi-story commercial towers requiring rapid installation and factory-controlled sealing, unitized curtain wall panels are pre-assembled and glazed inside a clean workshop into floor-to-floor modular frames, then hoisted onto pre-aligned floor anchors.

Aluminium Extrusions, Glazing Infills, and Spandrel Options

Long-term weather tightness and indoor cooling efficiency depend directly on selecting appropriate mullion depths, thermal barriers, and glass compositions tailored to Bhiwadi's sun exposure and building height.

Curtain wall framing is extruded from structural-grade 6063-T6 aluminium alloy. Mullion depth—commonly ranging from 100mm to 175mm or deeper for double-height showroom lobbies—is calculated based on floor-to-floor span height and local wind-load deflection limits. For air-conditioned office buildings, factory admin centers, and hospitals, thermally broken aluminium profiles insert a polyamide insulating strip between the outer and inner aluminium faces, stopping outdoor summer heat from conducting straight through the metal frame.

Vision glass areas utilize toughened safety glass or Double Glazed Units (DGUs) rather than ordinary annealed glass. A standard DGU pairs an outer 6mm or 8mm solar-control reflective or Low-Emissivity (Low-E) toughened glass pane with a 12mm to 16mm dehydrated air or argon spacer and an inner 6mm clear or Low-E toughened pane. This assembly blocks excessive infrared solar heat while letting natural daylight enter workspaces and dampening industrial and highway traffic noise. Where concrete floor slabs, ceiling plenums, or structural beams sit behind the facade, opaque spandrel glass panels—finished with ceramic frit coatings or backed with insulated aluminium trays—conceal structural elements cleanly from street view.

Visible exterior pressure plates and snap-on cover caps are finished in PVDF fluorocarbon paint or architectural powder coating in matte black, charcoal grey, champagne, or anodized silver. Alternatively, semi-unitized or structurally glazed curtain walls omit exterior caps on vertical or all four sides, holding glass panels via concealed toggle clamps and structural silicone for a sleek, flush exterior.

Site Surveying, Bracket Anchoring, and Glazing Installation

Because concrete floor slabs often vary slightly in alignment during civil construction, curtain wall installation relies on precise three-dimensional adjustment hardware.

Work starts with laser plumb-line surveying across all floor slab edges to establish a true vertical reference plane. Hot-dip galvanized mild steel (MS) L-brackets or channel brackets are anchored into the concrete slab edges using heavy-duty mechanical wedge anchors or chemical anchor studs. Slotted bolt holes in these brackets allow installers to adjust the grid inward, outward, and laterally to compensate for civil tolerances.

Vertical aluminium mullions are lifted, plumbed, and bolted to the slab brackets, incorporating internal aluminium splice sleeves at every floor joint to leave a calculated 12mm to 15mm thermal expansion gap. Horizontal transoms are mechanically joined to the mullions using shear blocks and stainless steel screws, sealed at every intersection with butyl tape and neutral silicone.

EPDM rubber gaskets are seated into the glazing channels before glass units are lifted into place using vacuum suction lifters. Setting blocks made of shore-hardened EPDM support the bottom edge of each glass unit without glass-to-metal contact. Exterior pressure plates are torqued evenly onto the mullions and snapped over with decorative aluminium caps, followed by continuous perimeter sealing using weather-grade neutral silicone and water spray testing.

Project Execution with SABA Aluminium & Glasses

Curtain wall construction across busy industrial and commercial belts leaves no margin for guesswork regarding wind deflection, internal drainage paths, or anchor pull-out strength. SABA Aluminium & Glasses collaborates with factory owners, commercial developers, architects, and structural engineers in Bhiwadi to match aluminium mullion inertia, bracket spacing, and solar-control glass ratings to the exact geometry of each building.

Consistent attention is given to internal weep drainage, compatible non-corrosive stainless steel fasteners, and genuine neutral-cure silicones so commercial and corporate buildings achieve reliable weather tightness and long-term structural stability.

Operational Advantages for Bhiwadi Properties

An engineered curtain wall offers clear functional advantages over conventional brick-and-window construction:

First, internal pressure-equalized drainage channels built inside modern curtain wall mullions safely collect any wind-driven monsoon rainwater that bypasses outer gaskets and expel it through exterior weep slots, preventing interior wall dampness. Second, combining Low-E double glazing with thermally broken frames significantly lowers daytime cooling loads during Bhiwadi's intense summer months while blocking Alwar Bypass Road traffic and industrial noise. Third, curtain wall grids allow seamless integration of concealed top-hung ventilation vents and automated smoke exhaust windows without disrupting uniform exterior grid lines.

Commercial, Institutional, and Industrial Applications

Manufacturing plants, corporate administrative blocks, banks, and logistics headquarters in Bhiwadi, Khushkhera, Chopanki, and Tapukara use curtain walls to create bright, open floor plates with panoramic exterior views while keeping industrial airborne dust outside. Hospitals, diagnostic centers, commercial plazas, and educational campuses adopt solar-control curtain walls across main entrance foyers, staircase towers, and patient lounges to maximize daylight while controlling indoor glare.

Retail malls and automobile dealerships along Alwar Bypass Road and Mansa Chowk also use double-height curtain wall systems—often paired with Aluminium Composite Panel (ACP) column wraps—to project a clean corporate presence.

Cost Factors and Budgeting Considerations

Estimating the investment for a curtain wall system involves evaluating several technical parameters beyond basic square footage:

Aluminium profile weight and depth represent a primary cost component; taller floor-to-floor spans require heavier, deeper mullions to limit wind bending. Glazing selection creates the next major price difference, as 24mm or 28mm Double Glazed Low-E units cost significantly more than single-glazed toughened glass. Capped pressure-plate curtain walls are generally more economical than four-sided structural silicone glazed systems, which require workshop silicone curing and specialized toggle hardware.

Additional cost variables include the quantity of hot-dip galvanized slab brackets, fire-stop mineral wool insulation at floor slab edges, operable casement window vents, exterior scaffolding or boom-lift access, and the consumption of structural and weatherproofing silicones.

Discuss Your Curtain Wall Project with SABA Aluminium & Glasses

If you are planning a new factory administrative block in RIICO Industrial Area, a commercial complex on Alwar Bypass Road, or an institutional facility in Bhiwadi, early coordination on curtain wall framing and glazing specifications ensures smoother civil execution and better energy performance. Contact SABA Aluminium & Glasses to review section profiles, inspect solar-control glass samples, and schedule an on-site structural measurement visit.

Frequently Asked Questions About Curtain Wall in Bhiwadi

1. What is the difference between a curtain wall and standard storefront windows?

Storefront windows are installed inside masonry openings between floor slabs and span only one story. A curtain wall hangs outside the concrete floor slab edges as a continuous, multi-story aluminium and glass grid engineered to handle higher wind loads, thermal expansion, and internal water drainage.

2. Which curtain wall system is better for commercial buildings in Bhiwadi: stick or unitized?

Stick-built curtain walls are more economical and practical for low- to mid-rise commercial buildings, factory admin blocks, and hospitals up to four or five stories in Bhiwadi, as components are assembled on site. Unitized systems are preferred for taller high-rise towers where rapid erection justifies higher fabrication costs.

3. How does a curtain wall stop rainwater from leaking inside during heavy monsoons?

Curtain wall mullions and transoms feature internal drainage channels and pressure-equalized chambers. Any water passing the outer EPDM gasket is captured inside the aluminium extrusion profile and directed outward through engineered weep holes at transom intersections, keeping interior rooms dry.

4. What type of glass is best for a curtain wall facing direct sunlight in Bhiwadi?

Double Glazed Units (DGUs) with soft-coat Low-Emissivity (Low-E) solar-control glass are recommended for sun-facing elevations. They block a high percentage of infrared solar heat and ultraviolet rays while allowing natural daylight indoors, reducing air-conditioning electricity consumption during 44-degree summers.

5. How much does a curtain wall help reduce traffic and industrial noise in Bhiwadi?

A curtain wall fitted with Double Glazed Units or acoustic laminated glass provides strong sound insulation against heavy truck and industrial noise along Alwar Bypass Road and RIICO zones. Using asymmetrical glass thicknesses—such as 8mm outer glass and 6mm inner glass—further dampens sound transmission.

6. How are concrete floor slab edges sealed behind a curtain wall for fire safety?

The gap between the concrete floor slab edge and the back of the curtain wall spandrel is packed with high-density, non-combustible mineral wool fire-stop insulation and sealed with fire-rated acoustic smoke sealant to prevent fire and smoke from spreading between floors.

7. What determines the depth and thickness of the aluminium mullions?

Mullion depth and wall thickness are determined by structural wind-load calculations, floor-to-floor span height, and the weight of the glass units. Taller spans or exposed high-wind locations require deeper 6063-T6 aluminium sections so the wall does not flex excessively during dust storms.

8. Can opening windows be added to a fixed glass curtain wall?

Yes, top-hung projected casement vents or parallel-opening windows can be built directly into curtain wall framing grids. They use heavy-duty stainless steel friction stays and multi-point locking handles to provide natural airflow without altering the exterior appearance when closed.

9. What are spandrel panels in a curtain wall system?

Spandrel panels are opaque glass or insulated aluminium sections placed over concrete floor slabs, ceiling voids, and structural columns. They match the exterior color of the vision glass while concealing structural elements and insulation layers from outside view.

10. How do curtain walls accommodate summer thermal expansion in Bhiwadi?

Aluminium expands noticeably under Bhiwadi's 44-degree summer temperatures. Installers connect vertical mullions using internal expansion sleeves at every floor slab and maintain calculated gaps between horizontal transoms and glass edges so the frame expands quietly without stressing the glass.

11. What is a capped curtain wall versus a structurally glazed curtain wall?

A capped curtain wall uses exterior aluminium pressure plates and snap-on cover caps to mechanically clamp the glass edges. A structurally glazed curtain wall bonds glass panels onto concealed aluminium sub-frames with structural silicone, creating an uninterrupted flush glass exterior without metal caps.

12. How are curtain wall glass panels cleaned on multi-story buildings in dusty industrial areas?

Multi-story curtain walls are cleaned using soft squeegees, clean water, and pH-neutral glass cleaners via suspended maintenance cradles, scaffolding, or telescopic water-fed poles. Annual checks of exterior weather silicone and drainage weep slots keep the system performing reliably.

13. What kind of brackets anchor the curtain wall to the building structure?

Heavy-duty hot-dip galvanized mild steel (MS) brackets or extruded aluminium anchors bolted to the concrete slab edges support the curtain wall. These brackets include slotted holes that allow precise alignment adjustments during installation to offset uneven concrete pouring.

14. Why is neutral-cure silicone mandatory in curtain wall glazing?

Neutral-cure structural and weatherproofing silicones release no corrosive acetic acid while curing. Acidic acetoxy sealants damage anodized or powder-coated aluminium finishes and degrade the edge seals of Double Glazed Units, causing moisture condensation inside the glass cavity.

15. Can a curtain wall be installed on an existing older commercial building or factory office in Bhiwadi?

Yes, an existing commercial building or administrative office can be retrofitted with a new curtain wall after verifying that the concrete floor slabs and columns can safely carry the anchor loads. The new curtain wall projects slightly outward, modernizing the exterior without demolishing interior spaces.

16. What is the lifespan of an aluminium and glass curtain wall?

A properly engineered aluminium curtain wall finished with PVDF coating and fitted with quality EPDM gaskets and neutral silicones typically lasts 25 to 30 years or more, requiring only periodic silicone resealing and routine glass washing over its service life.

17. What happens if a single glass unit in a curtain wall cracks?

Because curtain walls are modular, a damaged glass unit can be replaced individually. Technicians remove the exterior snap cap and pressure plate—or cut the perimeter silicone in structural systems—lift out the broken pane, and install a new matching unit from the outside.

18. Are thermally broken aluminium profiles worth using in Bhiwadi?

Yes, for air-conditioned corporate offices, hospitals, and commercial complexes in Bhiwadi, thermally broken profiles prevent outdoor heat from conducting straight through the aluminium frame into the room, reducing perimeter heat gain and condensation while improving indoor thermal comfort.

19. How long does it take to fabricate and install a commercial curtain wall?

A commercial curtain wall project generally takes 4 to 8 weeks depending on total elevation area, slab bracket preparation, custom DGU glass manufacturing lead times at toughening plants, and exterior scaffolding availability.

20. Does SABA Aluminium & Glasses provide curtain wall site measurements and installation in Bhiwadi?

Yes, SABA Aluminium & Glasses conducts on-site laser measurements across Bhiwadi, Khushkhera, Chopanki, and Tapukara, reviews architectural and structural drawings, supplies aluminium sections and solar-control glass, and handles complete curtain wall installation.

Related Aluminium & Glass Services in Bhiwadi

START YOUR PROJECT

Planning a Facade Project?

Let’s build something iconic together.

CALL NOW WHATSAPP
QUICK ENQUIRY

Tell Us About Your Project

Share your requirement and our façade expert will call you back.

☎ CALL NOW◉ WHATSAPP